xmoonproductions.org :: View topic - fps/performance issues and crashes

Code:

settings
{
  rendermode   = DIRECTX; // Can be 'OPENGL' or 'DIRECTX'
  xpos         = 0;
  ypos         = 0;
  width        = 1366;
  height       = 768;
  antialiasing = 0;
  vsync        = false;
  window       = true;
  volume       = 100;
  brightness   = 100;
  fovy         = 60.0;
  keyboard     = 0;
  feedback     = true;
  stereoscopic = false;
  save         = "save/save1.dat";
}
NOTE: using these settings causes the game to crash if I select "settings" from main menu, game runs fine.

Code:

settings
{
  rendermode   = OPENGL; // Can be 'OPENGL' or 'DIRECTX'
  xpos         = 0;
  ypos         = 0;
  width        = 1366;
  height       = 768;
  antialiasing = 0;
  vsync        = true;
  window       = true;
  volume       = 100;
  brightness   = 100;
  fovy         = 60.0;
  keyboard     = 0;
  feedback     = true;
  stereoscopic = false;
  save         = "save/save2_0.dat";
}

Code:

settings
{
  rendermode   = OPENGL; // Can be 'OPENGL' or 'DIRECTX'
  xpos         = 0;
  ypos         = 0;
  width        = 1366;
  height       = 768;
  antialiasing = 0;
  vsync        = true;
  window       = true;
  volume       = 100;
  brightness   = 100;
  fovy         = 60.0;
  keyboard     = 0;
  feedback     = true;
  stereoscopic = false;
  save         = "save/save2_0.dat";
}

Code:

settings
{
  rendermode   = OPENGL; // Can be 'OPENGL' or 'DIRECTX'
  xpos         = 0;
  ypos         = 0;
  width        = 1366;
  height       = 768;
  antialiasing = 0;
  vsync        = false;
  window       = true;
  volume       = 100;
  brightness   = 100;
  fovy         = 60.0;
  keyboard     = 0;
  feedback     = true;
  stereoscopic = false;
  save         = "save/save2_0.dat";
}

Author:	b00marrows [ Fri Jan 03, 2014 3:35 pm ]
Post subject:	fps/performance issues and crashes
FPS/Performance: I managed to play through the whole game but thought things where too slow and floaty. I accidental found the [ctrl]+[S] fps command and realised i have BAD fps. Normally my fps is around 20-30 but in some angles in some location it drops down to 8 or below. I'm on a MSI GX60 Laptop. AMD A10-4600m cpu AMD Radeon HD 7970M / 2GB gddr5 8GB ram i have 2 graphics cards: AMD Radeon HD 7660G, 512 MB AMD Radeon HD 7970M, 2048 MB for performance comparison, i can play skyrim at near max setting with 0 issues. X64 - DireckX Code: settings { rendermode = DIRECTX; // Can be 'OPENGL' or 'DIRECTX' xpos = 0; ypos = 0; width = 1366; height = 768; antialiasing = 0; vsync = false; window = true; volume = 100; brightness = 100; fovy = 60.0; keyboard = 0; feedback = true; stereoscopic = false; save = "save/save1.dat"; } NOTE: using these settings causes the game to crash if I select "settings" from main menu, game runs fine. scene: default Samantha fast sex options.

Author:	b00marrows [ Fri Jan 03, 2014 8:18 pm ]
Post subject:	Re: fps/performance issues and crashes
32X - OpenGL Code: settings { rendermode = OPENGL; // Can be 'OPENGL' or 'DIRECTX' xpos = 0; ypos = 0; width = 1366; height = 768; antialiasing = 0; vsync = true; window = true; volume = 100; brightness = 100; fovy = 60.0; keyboard = 0; feedback = true; stereoscopic = false; save = "save/save2_0.dat"; }

Author:	b00marrows [ Fri Jan 03, 2014 8:24 pm ]
Post subject:	Re: fps/performance issues and crashes
X64-OpenGL Code: settings { rendermode = OPENGL; // Can be 'OPENGL' or 'DIRECTX' xpos = 0; ypos = 0; width = 1366; height = 768; antialiasing = 0; vsync = true; window = true; volume = 100; brightness = 100; fovy = 60.0; keyboard = 0; feedback = true; stereoscopic = false; save = "save/save2_0.dat"; }

Author:	b00marrows [ Fri Jan 03, 2014 8:53 pm ]
Post subject:	Re: fps/performance issues and crashes
X32 - DirectX Code: settings { rendermode = OPENGL; // Can be 'OPENGL' or 'DIRECTX' xpos = 0; ypos = 0; width = 1366; height = 768; antialiasing = 0; vsync = false; window = true; volume = 100; brightness = 100; fovy = 60.0; keyboard = 0; feedback = true; stereoscopic = false; save = "save/save2_0.dat"; }

Author:	xpadmin [ Sat Jan 04, 2014 11:12 am ]
Post subject:	Re: fps/performance issues and crashes
The bottleneck in your case is the processor. We use the CPU for cloth integration and collision. In your images the PPSR (Process per second real) does not get higher that 45 fps which means that the fps due to the CPU does not get higher than 45. The FPSR (Frames per second real for graphics card) does get higher than 60 fps. So your graphics card is not the bottleneck! N.b. The FPS is the minimum of the FPSR and PPSR, the actual framerate you are getting. The FPS in your case is probably higher without cloths on, because then the cloth integration does not need to be done. What CPU do you use? Intel quad core 2.3 Ghz should be enough.

xmoonproductions.org https://xmoonproductions.org/

fps/performance issues and crashes https://xmoonproductions.org/viewtopic.php?f=7&t=1986	Page 1 of 2

Author:	b00marrows [ Sat Jan 04, 2014 11:18 am ]
Post subject:	Re: fps/performance issues and crashes
xpadmin wrote: The bottleneck in your case is the processor. We use the CPU for cloth collision. In your images the PPSR (Process per second real) does not get higher that 45 fps which means that the fps due to the CPU does not get higher than 45. The FPSR (Frames per second real) does get higher than 60 fps. So your graphics card is not the bottleneck! thanks for the reply! if that's the case why dose the game not demand more CPU? its normally sitting around 30-40% (as posted on each screenshot) hmm...my cpu is quad-core, so dose your game only support duel cores or something?

Author:	xpadmin [ Sat Jan 04, 2014 11:23 am ]
Post subject:	Re: fps/performance issues and crashes
We use four threads: - One for rendering - One for cloth integration - One for fluid integration - One for rest of physics. But also CPU memory access needs to be fast. Intel performs better in this case, in my experience.

Author:	b00marrows [ Sat Jan 04, 2014 11:31 am ]
Post subject:	Re: fps/performance issues and crashes
xpadmin wrote: We use four threads: - One for rendering - One for cloth integration - One for fluid integration - One for rest of physics. But also CPU memory access needs to be fast. Intel performs better in this case, in my experience. hmm... I don't know what to do than if 2.3GHZ quadcore is not enough for stable gameplay...

Author:	xpadmin [ Sat Jan 04, 2014 11:38 am ]
Post subject:	Re: fps/performance issues and crashes
2.3 Ghz Quad core should be enough. What system specs do you have exactly (CPU type, memory size, etc) ? What OS are you using (64 bits gives speed increase of 40%) ? Also do you run other software simultaneously that eats processing power? Do you use (DIRECTX) full screen mode (window = false) ? Regards xpadmin

Author:	b00marrows [ Sat Jan 04, 2014 11:50 am ]
Post subject:	Re: fps/performance issues and crashes
xpadmin wrote: 2.3 Ghz Quad core should be enough. What system specs do you have exactly (CPU type, memory size, etc) ? What OS are you using (64 bits gives speed increase of 40%) ? Also do you run other software simultaneously that eats processing power? Do you use (DIRECTX) full screen mode (window = false) ? Regards xpadmin 1. i posted my system at the top: I'm on a MSI GX60 Laptop. AMD A10-4600m cpu memory size?... ram? 8GB 2. windows 8 64bit 3. while gaming, never. 4. as stated above, I disabled full screen to do these tests. also i mentioned that disabling fullscreen causes a bug that makes the game crash when you click setting on the menu. im clocking my cpu to 2.4 to see if theres a diffirence, im also going to test if the game uses my cpu's turbo mode properly.

Page 1 of 2	All times are UTC
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/