xmoonproductions.org
https://xmoonproductions.org/

Plasma Collision - and 3.0 Walkthrough
https://xmoonproductions.org/viewtopic.php?f=8&t=3438
Page 1 of 5

Author:  Caffiend [ Sat Dec 06, 2014 8:13 pm ]
Post subject:  Plasma Collision - and 3.0 Walkthrough

I haven't been able to get to the creature yet.

Is there a specific Plasma Shift and Speed that I'm supposed to be hitting? The monitor says NO COLLISION DETECTIVE - ADJUST SHIFT. Well, I've run the shift control from -40 to 40 on both machines and nothing seems to work.

I hate to wuss out, but is there a Walkthrough available yet for 3.0?

Author:  sucellus3212 [ Sat Dec 06, 2014 8:17 pm ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

1 set at 20.5 phase
2 set at 17.5 phase
max speed for both

Author:  Caffiend [ Sat Dec 06, 2014 8:23 pm ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

Great. Thanks. That did the trick. Not sure why I wasn't getting "COLLISION DETECTED" before. My finger was getting tired going back and forth.

Author:  skidrow [ Sat Dec 06, 2014 11:49 pm ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

Tested speed 1140 and from -16 to -23 still no COLLISION, 17,5 on + worked for me.

Author:  AK420 [ Sun Dec 07, 2014 4:49 am ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

What you are supposed to do is watch the pipes above the control stations and get the two plasma bolts to sync up.

Once they are synced you increase the speed.

Author:  prlumley1 [ Sun Dec 07, 2014 6:03 am ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

how to get card to slide

Author:  skidrow [ Sun Dec 07, 2014 10:45 am ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

When I slow down to 60 it feels like -23.2 they are matched sound and picture but still no luck when I speed up :(

Author:  skidrow [ Sun Dec 07, 2014 12:37 pm ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

Anyone that have any other suggestion on shift on reactor 1 the one with - shift?

Author:  skidrow [ Sun Dec 07, 2014 1:58 pm ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

That explains everything toth r1 was only - but you cod go +

Author:  fortunedoes [ Mon Dec 08, 2014 9:52 pm ]
Post subject:  Re: Plasma Collision - and 3.0 Walkthrough

I'm kind of stuck ..

I didn't put the container in the second one and now i just can't put it in since the command is blocked, turning off the reactor or wheeling back the heat doesn't turn anything off :(

Alright, so i left the game and restarted and now i can't set the second dome down ...

Okay it's just me being stupid, we must set the 2 portal before doing anything :mrgreen:

Page 1 of 5 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/